Stackpole Pot date help!

History[ edit ] The M1 helmet was adopted in to replace the outdated M A1 “Kelly” helmet [3] after research was done in the s by Major Harold G. The M1 was phased out during the s in favor of the PASGT helmet , [5] which offered increased ergonomics and ballistic protection. It should be noted that no distinction in nomenclature existed between wartime front seams so-called due to the location of the seam on the helmet’s brim and post war, or rear seam, shells in the United States Army supply system, hence World War II shells remained in use until the M1 was retired from service. In Israeli service, reserve soldiers have used the M1 helmet in combat as late as Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner. The outer shell cannot be worn by itself. Shell[ edit ] The shell of the M1 was changed mainly in silhouette, as seen from the side, from its World War II beginnings. The rim edge of the shell has a crimped metal band running around it, which provides a clean edge. This is usually known as the “rim”. The metal band of the rim material has a seam where the ends of the strip meet.

The Food Timeline

The source-date code on a pot is a 6 or 7 digit code impressed into the casing of the potentiometer. For speakers this code can be 5, 6, 7 or 8 digits long, and it’s ink-stamped or paint-stamped on the “bell housing” of the speaker. In either case, the code works the same. The first 3 digits on a pot, or the first 2, 3 or 4 digits on a speaker are the source or manufacturer code.

Fishing techniques are methods for catching fish. The term may also be applied to methods for catching other aquatic animals such as molluscs (shellfish, squid, octopus) and edible marine invertebrates.. Fishing techniques include hand-gathering, spearfishing, netting, angling and trapping. Recreational, commercial and artisanal fishers use different techniques, and also, sometimes, the same.

Reading pot codes How to read pot codes, and what they mean An early s pot from a Gibson guitar. Once decoded, the writing on the back or sides can be very informative If you’ve been reading articles about dating a vintage guitar, you may well have come across mention of pot codes. The pots, or potentiometers to give their full name, are the variable resistors that control volume and tone.

Better quality pots are often stamped with a number of codes; typically part numbers, date of production, manufacturers codes and resistance values. Many pots don’t carry all of this information, but the better quality guitars produced in America regularly do. So where are these codes? Normally they are stamped or inked onto the back or sides of the pot.

So reading them will require opening control cavities, removing scratchplates, or in the case of a semi acoustic, removing the pots entirely. Codes can be worn, obscured by solder and other components, or simply very small. Finding them is not always easy; this is obviously not something for the faint-hearted, but once performed a few times, nowhere near as daunting as it might at first seem.

There are many exceptions and variations to the general rules described below, some of which are highlighted in the examples at the end. Part numbers Many pots do not have part numbers, but the larger guitar manufacturers did list pots by part number in their spare parts manuals. You can look up Gibson potentiometers by their part number in the Gibson pot index on this site. Manufacturers codes There are very many electronic companies worldwide producing potentiometers, but most American vintage guitars of the 20th Century used pots by just a few manufacturers.

M1 helmet

Bass 6 , to Typical wear on a ‘s Fender maple fingerboard. Fingerboard Material Maple fingerboard, s: This was the standard neck on all models until when the Jazzmaster was introduced with a rosewood fingerboard; the rest of the Fender models changed to rosewood fingerboards in mid Rosewood fingerboard, “Slab” Brazilian , to

Compiled by Prof. Wesley Edward Arnold MA. With thanks to the help of many folks to told me their memories. References and credits are being added.

E-H talking pedal I just earlier this evening found out that what I thought was a talking pedal was actually called a Golden Throat. What does a talking pedal do, and how does it work? Is it the same thing as a Golden Throat? They are completely different. The golden throat is a “talk box” like Frampton, Walsh, etc used. It is a speaker driver connected to a tube which goes in your mouth and needs to be miked through a PA to be used.

Centralab Pot Codes

This meant that Frankfurt was incorporated into the confederation of the Rhine. In , Dalberg adopted the title of a Grand Duke of Frankfurt. The Grand Duchy remained a short episode lasting from to , when the military tide turned in favour of the Anglo-Prussian lead allies that overturned the Napoleonic order. Frankfurt as a fully sovereign state[ edit ] After Napoleon’s final defeat and abdication, the Congress of Vienna — dissolved the grand-duchy and Frankfurt became a fully sovereign city state with a republican form of government.

Frankfurt entered the newly founded German Confederation till as a free city, becoming the seat of its Bundestag, the confederal parliament where the nominally presiding Habsburg Emperor of Austria was represented by an Austrian “presidential envoy”.

M1ヘルメットは2つのフリーサイズのヘルメット、すなわち外帽(Shell, steel pot)と中帽(liner)から構成される。中帽はファイバー製あるいは樹脂製であり、クッションやサイズ調整の役割を兼ねている。.

Rare “stell adjustable neck” teisco gen gakki hollow body AncientSociety An early s pot from a Gibson guitar. Once decoded, the writing on the back or sides can be very informative If you’ve been reading articles about dating a vintage guitar, you may well have come across mention of pot codes. The pots, or potentiometers to give their full name, are the variable resistors that control volume and tone.

Better quality pots are often stamped with a number of codes; typically part numbers, date of production, manufacturers codes and resistance values. Many pots don’t carry all of this information, but the better quality guitars produced in America regularly do. So where are these codes? Normally they are stamped or inked onto the back or sides of the pot.

The Guitar Dater Project

Posted 11 February – That’s interesting you bring up the horn shape and the headstock shape. I don’t know if it has anything to do with it, but the Deluxe model and a buttload of others were made at two different factories- both Kalimazoo and Nashville.

Nov 14,  · I opened up my National New Yorker lap steel to check the pot date. I found the following engraved on the pot: Stackpole C Doesn’t seem to fit the date coding we’re use to.

Teen slave chat webcam free – Stackpole pot dating The Russian made Big Muff pots also lack date codes. It has mini humbuckers and the only mod I can see is the machine heads have been replaced with Grovers. The headstock serial numbers, in the early to mid , even up to , were very random In other words more clearly, Hog 3 piece neck also means Also, from ’69 to about ’73, it will have a “Pancake” body. A Pancake body is easy to tell, as it would have a thin maple stripe all the way around, being made from two thinner layers sandwhiching a thim maple sheet between them.

I have owned it since mid 80’s Thanks for your help. If it doesn’t, it’s at least as new as ’73, and still before ‘

Reading Guitar Potentiometer Codes

Artichokes Food historians confirm artichokes descended from their wild cousins cardoons. While the wild variety was consumed in ancient times, modern artichokes, as we know them today, first surface during the Medieval ages. These “Old World” vegetables were introduced to America by European settlers. Jerusalem artichokes , a “New World” food related to sunflowers, are a completely unrelated vegetable.

Chinese artichokes aka Japanese artichokes are completely unrelated. What are artichokes and how long have we been eating them?

Watch and download dating stackpole pots hot porn dating stackpole pots movie and download to phone.

Return to the Main Index. Sometimes there just isn’t enough information on electric instruments and amps to allow them to be properely dated. And many people ask me to try and determine the year of their old amplifier, or to help them with the year of their older off-brand electric guitar. Since I primarily collect amps by Fender, and guitars by Gibson, Fender, Martin, National, Epiphone, Gretsch and Rickenbacker, I really can’t help them with these other less popular brands.

As you have probably noticed, there is plenty of information here to help date the brands that I am interested in. But where does that leave everyone else? Well I’m not one to leave you out in the informational cold, so here’s something that I use quite often in dating amplifiers and electric guitars.

It’s called the “source-date code”, and it can help determine the approximate age of an electric instrument by the date its components were manufactured. Source-Date Codes On American made vintage gear, the pots and speakers provide an excellent opportunity to date a piece of equipment by referencing their “source-date code”. The source-date code found on pots and speakers gives the manufacturer and date roughly when the components were made. It may have been some time before the part was installed at the factory, but it still provides a good approximation of when the gear was made.

The source-date code will signify the earliest possible date that the instrument or amp could have been made. This isn’t going to be exact, but it will give you a “ball-park” age.

Vintage Guitar Effects F.A.Q. page

The first Fender solidbody model, the Esquire , lasted in name only from June to October This model name was replaced by the “Broadcaster”, which lasted in name only from the October to January All Broadcasters have truss rods, where many Esquires often have no truss rod.

gretsch ‘s hardshell case original! “no reserve” item number: sold. gretsch ‘s hardshell case original! “no reserve”.

This information original was found on The Unofficial Ampeg Page http: I pulled this information from Google’s cache of the site. It has a note at the top of the page that they were reprinting with permission from the authors of Ampeg: If anyone feels this page should be taken down, please feel free to contact me. Ampegs can be divided into six distinct groups for dating purposes: Each group uses a unique serialization scheme that can be used to assist in dating the amps, but in many cases, it is the features and characteristics of the amps that determine the year of manufacture.

Electronic Industries Association EIA codes can also be very useful for giving clues as to an amp’s age. These codes can be found on speakers, transformers, pots, capacitors, and multi-section electrolytic “can” caps. Of course, these codes are only applicable to original components, not replacement parts.

Dating Ampeg Amplifiers :: Ampeg

History[ edit ] The M1 helmet was adopted in to replace the outdated M A1 “Kelly” helmet [3] after research was done in the s by Major Harold G. The M1 was phased out during the s in favor of the PASGT helmet , [5] which offered increased ergonomics and ballistic protection. It should be noted that no distinction in nomenclature existed between wartime front seams and post war shells in the United States Army supply system, hence World War II shells remained in use until the M1 was retired from service.

In Israeli service, reserve soldiers have used the M1 helmet in combat as late as The M1 is two “one-size-fits-all” helmets—an outer metal shell, sometimes called the “steel pot”, and a hard hat —type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer’s head.

Find great deals on eBay for stackpole pot. Shop with confidence.

Brackley, Great Britain Came across this George Gruhn and Walter Carter article a while ago, about how checking codes on pots can assist in dating guitars. Came across Hans on a Guild Forum many years ago and he helped me with a few questions. Stamped on every potentiometer volume and tone pots is a six or seven digit source code that tells who made the pot, as well as the week and the year. The source dating code is an element of standardization that is administered by the Electronics Industries Association EIA , formed in The EIA assigns each manufacturer a three digit code there are some with one, two or four digits.

The first three digits indicate the company that built the potentiometer. Some times these digits may be separated by a space, a hyphen, or a period. The most common company codes found are: If the code is seven digits long, then the fourth and fifth digits indicate the year. The final two digits in either of the codes indicate the week of the year the potentiometer was built. Any final two digits with a code number over 52 possibly indicates a part number instead of a week of the year code.

The potentiometers must be original to the piece new solder, or a date code that is off by ten or more years is a good giveaway to spot replacement pots ; and that the pot code only indicates when the potentiometer was built!

1960 Fender Stratocaster 3-t Sunburst / GuitarPoint Maintal / Vintage Guitars